24V DRIVE, 2-COLOR THERMAL PRINTER
2” TYPE MECHANISM
FTP-622MCL101/102/353/354
■ OVERVIEW
New 2-color printer (blue/black or red/black) joins FTP-602
Series. The series consists of 24V battery drive compact thermal
printers which can print at high speed.
This series is suitable as built-in printer for a variety of
applications, such as portable terminals, POS terminals, ticket
machines, coupon machines, label printers, banking machines,
measuring devices, medical equipment, etc.
■ HIGHLIGHTS
• 2 Color printing
It can print 2 colors: blue/ black or red/black
FTP-622MCL101
• High speed printing
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu
Components' unique head drive control (at monochromatic
printing).
Speed of 2-color printing:
- blue and red: 80 mm/s (460
dotlines/s) maximum
- monochromatic print: 40mm/s
maximum
• Auto Cutter
Printer with auto cutter (full cut/ partial cut) is available.
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• Easy head access
It is designed for easy head cleaning and head replace-
ment.
• Two paper paths
Front and bottom paper insertion is available.
1
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
(Continued)
Part number
Item
Specifications
FTP-622MCL101/102/353/354
24 VDC ±5% 1.1 (1.7A)
(24V Rav1500Ω, 25% printing ratio)
For head
For printer motor
For cutter motor
For logic
24VDC±5% 1A maximum
24VDC±5% 1A maximum
5VDC±5% 0.5 A maximum
82 (W) × 48 (D) × 20 (H) mm
97 (W) × 57 (D) × 38(H) mm
131 (W) × 89 (D) × 24 (H) mm
Approximately 81g
Power
supply
Printer Mechanism
Mechanism with cutter
Interface board
Printer Mechanism
Mechanism with cutter
Head
Dimensions
Weight
Life
Approximately 280g
Pulse durability: 1 × 108 pulse/dot (using Fujitsu Components' standard
driving method)
Wear resistance: 50 km (at 25% print ratio)
Cutter
3x103 times minimum
5x105 times minimum
Operating temperature
Operating humidity
Storage temperature
Storage humidity
Head temperature
Paper out/Mark detect
Head release
+5 to +40°C (Guarantee, but can operate between 0°C to +50°C)
20 to 85% RH (no condensation)
–20 to +60°C (excluding paper)
5 to 95% RH (no condensation)
By thermistor
Environmental
conditions
Detection
By photointerrupter
By slide switch
2 color paper (blue/black) PB770 (Mitsubishi paper)
(red/black) PB670 (Mitsubishi paper)
Recommended
thermal sensitive
paper
High sensitivity paper
Standard paper
TF50KS-E4 (Nippon paper)
TF60KS-E (Nippon paper), FTP-020P0104 (58mm)
PD150R (Oji paper), FTP-020P020P0701 (58mm)
Medium term paper
TP60KS-F1 (Nippon paper),FTP-020P0102(58mm)
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)
PD160R-N (Oji paper)
Long term paper
AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)
3
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
■ DIMENSIONS
1. Printer mechanism
FTP-622MCL101/102
Unit: mm
2. Printer mechanism with cutter
FTP-622MCL353/354
0.5
37.2
13.3
MCL303
B ¢ ≥ Å Ç ∫ ≈ Ç ¢ â Ç » Á Ç Ç ê G … Ç ê n Ç
à ”
í ç
MCL354
(96.7)
Å} 1
48.9
47.8
(73.1)
JAPAN
FT
Unit: mm
4
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
Interface board
105.4
87.6
41.8
21.8
CN9
CN5
CN3
30 29
1
2
1
CN1
CN8
CN7
1
4
4
1
33.2
86.4
105.4
120.7
5.1
4-Ø3.6 ±0.1
5.1
Height of devices side
Height of solder side
Unit: mm
5
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
6
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
■ CONNECTOR FOR THERMAL HEAD
1.
Head side : IL-FPC-28CLIP (JAE)
Board side : 52045 (Molex) or equivalent
*1: Symbol: " " means a negative logic signal
Thermal head heat sink
Head up level
Motor
1, 2, 3, ......................................15, 16
Connector Pin No.
2. Motor connectors
3. Sensor connectors
Motor side : PHR-4 (J.S.T.) or equivalent
Sensor
: PHR-5 (J.S.T.) or equivalent
Board side : B4B-PH-K-S (J.S.T.) or equivalent
Board side : B5B-PH-K-S (J.S.T.) or equivalent
No. Signal Comment
No. Signal Comment
1
2
3
4
5
VSEN Power for paper sensor
PHE Photo interrupter emittor
PHK Photo interrupter cathode
SW1 Head up detect switch 1
SW2 Head up detect switch 2
1
2
3
4
B
B
A
A
Pulse motor driving B
Pulse motor driving B
Pulse motor driving A
Pulse motor driving A
7
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
■ FUNCTION
ITEM
ITEM
1.
2.
3.
4.
5.
6.
7.
Test printing
8.
9.
Motor power save
Mark detection
Paper-out detection
Paper near end detection
10.
11.
12.
13.
MCU trouble detection
Power on/off sequence protection
Motor protection
Head-up detection
Abnormal temp. of thermal head detection
Blown fuse detection
Hardware timer
Abnormal voltage detection of head
8
|
Electro Voice Microphone PL80a User Manual
Everpure Water System SC10 11 User Manual
First Alert Smoke Alarm SA320CN User Manual
FujiFilm Digital Camera 16243252 User Manual
Fundex Games Games Labyrinth User Manual
GE Clothes Dryer SE1200 User Manual
Generac Portable Generator 004700 0 User Manual
Generac Portable Generator SE10000 User Manual
Generac Welding System 005411 0 User Manual
GE Range 49 80591 2 User Manual